Bourgault - другое оборудование

The wide chassis and dual balance axles (forward-reverse and side-to-side) guarantee unrivaled stability in any field conditions, allowing for high operating speeds and reduced traction requirements. The chassis is robust and reliable, and all major components feature lubrication-free connections.

The unloading auger's turret design allows for precise and rapid unloading of the bin, even when it's impossible to get a truck closer. The turret design also allows the operator to avoid collisions with the sides of the truck when maneuvering.

Electronic scales and a printer can be installed upon request to track and record harvesting.
The auger's unloading capacity is up to 12.3 m³/min, allowing a full bin to be unloaded into vehicles at the edge of the field in less than 4 minutes. Unloading hatches located underneath the bin allow for even faster unloading into receiving pits.

Eight support wheels arranged in four rows distribute the hopper's total weight as evenly and efficiently as possible. The specific ground pressure does not exceed 1.34 kg/cm².
The low bunker height ensures safe and comfortable working conditions when unloading combines on the move. Mesh screens on the front and rear panels allow the operator to monitor the current product volume.
If desired, the storage bin can be equipped with a tarpaulin roll cover.
The hopper's unique chassis and special frame design allow for a maximum tractor hitch load of 1,450 kg when the hopper is fully loaded (up to 42 m³ of product), reducing workload and increasing the service life of both the hopper and the tractor. The brake system is also eliminated.
Lighting in all work areas ensures safe work and transportation at night.
Protective shields protect the towing hitch components from possible damage by tractor wheels during sharp turns.
The unique belt drive of the auger ensures its smooth start and uninterrupted operation.

The 9,090-liter tank is mounted behind the cultivator frame or behind the seed and fertilizer hopper. The tank is made of high-strength plastic, and the transport trailer features a pivoting front axle with a wear-resistant polymer collar, ensuring a long service life in harsh conditions.
A reinforced electric clutch activates and deactivates the wheel-driven pump drive of the measuring system. Unlike units from other manufacturers, the operator does not have to manually disconnect the drive shaft for transporting the LFC.
The metering system can be equipped with either piston pumps with a capacity of 130 or 260 l/min, or a high-performance centrifugal pump and a product flow control system. This pump is hydraulically driven and has a capacity of up to 340 l/min. Flow can be monitored on the go, directly from the tractor cab. In addition to monitoring the applied product flow rate, the system also tracks the area processed and alerts when the product level in the tank is low.

If desired, a transfer pump powered by a 6.5 hp gasoline engine can be installed on the tank. It can completely fill the tank in less than 12 minutes.
The main distributor from the pump delivers liquid product under pressure to secondary boom-type distributors, where the product passes to the coulters through blocks with nozzle nozzles, allowing for precise application rates ranging from 50 to 1500 l/ha.